UCC2893PW

16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2893PW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 302
Description: 16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	250kHz
Base Part Number	UCC2893
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	11.1V
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	2A
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Quiescent Current	2mA
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%
Clock Sync	Yes
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2893PW Overview

Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). Voltages 8.5V~16V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~85°C TA dc switcher. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. The 16 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Searching "UCC2893" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 11.1V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 73 %. A frequency of 250kHz is used by the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 12V. The dc switching utilizes 2mA when it is in a dormant state. It is possible to set the input voltage as 110V for nominal working statuses. Voltage 12V must be supplied. You should not supply more current than 3mA to the controller.