UCC2893PWR

16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2893PWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 615
Description: 16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver (Kg)

Details

Tags

Parameters
Clock Sync	Yes
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UCC2893
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	11.1V
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	150mA
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	250kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%

UCC2893PWR Overview

This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.5V~16V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. There is a switch at 250kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, On Time Control, Ramp, Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 12V. UCC2893 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 11.1V. If you start a project, note down the dc dc regulator's usual output current of 150mA. The maximum duty cycle of this voltage regulator dc to dc is set to 73 % to ensure reliability during power-up and power-down. Switching controller operates at 1MHz Hz. A circuit should contain 12V in order to ensure the voltage regulator dc to dc runs safely and reliably. You can set the input voltage to 110V for nominal working status. The supply voltage must be 12V. There should be 3mA more than 3mA amps of current supplied to the controller.

UCC2893PWR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz