banner_page

UCC2894DRG4

16 Terminations8.5V~16V 16 Pin UCC2894 AC to DC power converter1 Outputs


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC2894DRG4
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 381
  • Description: 16 Terminations8.5V~16V 16 Pin UCC2894 AC to DC power converter1 Outputs(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Weight 141.690917mg
Operating Temperature -40°C~105°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Frequency 1MHz
Base Part Number UCC2894
Pin Count 16
Number of Outputs 1
Output Voltage 11.1V
Operating Supply Voltage 12V
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 150mA
Voltage - Supply (Vcc/Vdd) 8.5V~16V
Control Features Soft Start, Sync
Topology Flyback, Forward
Control Mode CURRENT-MODE
Control Technique PULSE WIDTH MODULATION
Rise Time 19ns
Supply Current-Max (Isup) 3mA
Fall Time (Typ) 14 ns
Nominal Input Voltage 110V
Switcher Configuration SINGLE
Internal Switch(s) No
Fault Protection Current Limiting
Max Duty Cycle 73 %
Duty Cycle 70%
Output Isolation Isolated
Voltage - Start Up 12.7V
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC2894DRG4 Overview


There is a ac to dc converter embedded in package 16-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~105°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .This AC/DC converter is suitable for operation in the range of 8.5V~16V supply voltage (Vcc/Vdd).There are a total of 16 terminations.Approximately 16 pins are present on the ac/dc converter.There are 16 pins in total.If you select the UCC2894 family, you will be able to search similar acdc converters.There are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .We are setting the output current to 150mA .This AC/DC converter produces a voltage of 11.1V as its output.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.An interface IC conducts when its supply voltage is 12V .Remember that this AC to DC converter should be set to 12V at all times.

UCC2894DRG4 Features


Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 150mA
Operating Supply Voltage at the range of 12V

UCC2894DRG4 Applications


There are a lot of Texas Instruments UCC2894DRG4 AC DC Converters applications.

  • Standby power
  • AC/DC Adaptors/Chargers for E-books
  • AC?DC USB chargers for Cell Phones
  • LED Driver
  • Universal Off-Line Power Supplies
  • Set-top boxes
  • Battery Chargers
  • Replaces linear transformers
  • Charger
  • Tablets

Write a review

Note: HTML is not translated!
    Bad           Good