UCC2895DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UCC2895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 5.15V |
| Output Type | Voltage |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Power Dissipation | 650mW |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2895DWG4 Overview
The ac to dc converter is embedded in 20-SOIC (0.295, 7.50mm Width) package.The AC/DC power converter type is Tube .As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Vcc/Vdd can be used within the range of 10V~16.5V supply voltage.There are a total of 20 terminations.On this ac/dc converter, there are 20 pins.The pins of the ac-dc converter count up to 20 .The ac dc converters are suitable for mounting by Surface Mount .Based on the UCC2895 family, you can search for similar acdc converters.There are 4 outputs to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .Currently, the output current is set to 10mA .Its output voltage amounts to 5.15V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.On the basis of a unique technique, the input voltage can be ensured to be 16.5V .It is possible to read the REACH SVHC standard at: No SVHC .It is also possible to determine ALSO OPERATES IN CURRENT MODE using this ACDC converter.Keep in mind that this AC to DC converter should always be set to 12V .It is configured with a Voltage output.
UCC2895DWG4 Features
Packaged with 20-SOIC (0.295, 7.50mm Width)
With 20 pins
Output Current at 10mA
Output Type : Voltage
UCC2895DWG4 Applications
There are a lot of Texas Instruments UCC2895DWG4 AC DC Converters applications.
- Vacuum Cleaner
- Universal input AC/DC adapters (15W - 45W)
- Automotive Clusters
- Tablets
- AC-DC Output Power Conversion Applications
- Automotive Infotainment
- Auxiliary Power Supplies
- Standby Power Supplies
- Standby Power Supplies
- Chargers for cell/cordless phones
