Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
20 |
Weight |
569.995512mg |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CAN ALSO BE CONFIGURED IN CURRENT MODE |
Subcategory |
Switching Regulator or Controllers |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
12V |
Terminal Pitch |
1.27mm |
Frequency |
527kHz |
Base Part Number |
UCC2895 |
Pin Count |
20 |
Number of Outputs |
4 |
Output Voltage |
250mV |
Input Voltage-Nom |
12V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
5mA |
Output Current |
10mA |
Voltage - Supply (Vcc/Vdd) |
10V~16.5V |
Control Features |
Frequency Control, Soft Start, Sync |
Input Voltage (Min) |
9.8V |
Topology |
Full-Bridge |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
1MHz |
Input Voltage (Max) |
17.5V |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
20ns |
Supply Current-Max (Isup) |
6mA |
Fall Time (Typ) |
20 ns |
Switcher Configuration |
PHASE-SHIFT |
Internal Switch(s) |
No |
Max Duty Cycle |
100 % |
Output Isolation |
Isolated |
Voltage - Start Up |
11V |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCC2895MDWREP Overview
In the package 20-SOIC (0.295, 7.50mm Width) , the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.There is a AC/DC converter mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.When the switching frequency reaches 1MHz , the circuit is closed.It can be used within the range of 10V~16.5V supply voltage (Vcc/Vdd).In total, it has 20 terminations.The ac/dc converter has a total of 20 pins.There are 20 pins in total.You can search similar acdc converters based on UCC2895 family.The number of outputs to run is 4 .Switching Regulator or Controllers contains the ac to dc conversions.In this AC to DC transformer, the output current is set to 10mA .It produces a voltage of 250mV .The power AC DC is capable of high efficiency when operated at a frequency of 527kHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 17.5V .When utilizing this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE can also be discovered.This AC to DC converter should always be set to 12V .
UCC2895MDWREP Features
Packaged with 20-SOIC (0.295, 7.50mm Width)
Switching Frequency at 1MHz
With 20 pins
Output Current at 10mA
UCC2895MDWREP Applications
There are a lot of Texas Instruments UCC2895MDWREP AC DC Converters applications.
- Handheld/Battery-Powered Systems
- AC/DC Adaptors/Chargers for Cell Phones
- AC/DC Adaptors/Chargers for PDAs
- WiFi Wireless
- Set-top boxes
- Portable audio
- Replacements for bulky plug-in transformers
- Battery Chargers
- AC?DC USB chargers for Cell Phones
- AC?DC USB chargers for Tablets