UCC2895N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2895 |
| Pin Count | 20 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Number of Channels | 4 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 5mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2895N Overview
In the 20-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -55°C~150°C TJ .In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .The voltage range of the supply can be set to 10V~16.5V (Vcc/Vdd).There are a total of 20 terminations in it.The ac/dc converter has a total of 20 pins.There are 20 pins in total.Through Hole is the recommended mounting method for the ac dc converters.Search similar acdc converters based on UCC2895 family members.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 100mA .Its output voltage is250mV .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 16.5V .When utilizing this ACDC converter, ALSO OPERATES IN CURRENT MODE can also be discovered.Ensure that this AC to DC converter is always set to 12V .The number of channels is 4 .
UCC2895N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 100mA
With 4 channels on it
UCC2895N Applications
There are a lot of Texas Instruments UCC2895N AC DC Converters applications.
- LED lights
- Adaptors for DSCs
- Industrial controls
- Battery chargers for cordless
- Dimmers
- Set -Top Box (STB) Power Supply
- SMPS house keeping power supplies
- Standby and Auxiliary Power Supplies
- Humidifier
- Networking
