UCC2895PWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2895PWTR Overview
It is embedded in package 20-TSSOP (0.173, 4.40mm Width) .It is available in Tape & Reel (TR) AC/DC power converter.There is a AC/DC converter mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.This AC/DC converter is designed for use within the range of 10V~16.5V supply voltage (Vcc/Vdd).As a result, it has a total of 20 terminations.On this ac/dc converter, there are 20 pins.The pins of the ac-dc converter total to 20 .Suitable mounting is provided by Surface Mount .Based on the UCC2895 family, you can search for similar acdc converters.There are 4 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 10mA .The output voltage of the AC/DC converter is 250mV .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 16.5V .It is also possible to determine ALSO OPERATES IN CURRENT MODE using this ACDC converter.This AC to DC converter should always be set to 12V .
UCC2895PWTR Features
Packaged with 20-TSSOP (0.173, 4.40mm Width)
With 20 pins
Output Current at 10mA
UCC2895PWTR Applications
There are a lot of Texas Instruments UCC2895PWTR AC DC Converters applications.
- Standby power
- Battery Chargers
- Power Adaptors
- Standby and Auxiliary Power Supplies
- Power adapters for network devices
- White goods
- Battery chargers for media tablets
- Switching AC-DC Charger
- Low-Voltage I/O System Power
- Standby Power Supplies
