UCC2895Q
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UCC2895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.1V |
| Height | 4.06mm |
| Length | 8.96mm |
| Width | 8.96mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2895Q Overview
This ac to dc converter is embedded in package 20-LCC (J-Lead) .It is available in Tube AC/DC power converter.This AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.A range of 10V~16.5V supply voltages (Vcc/Vdd) can be used.It has a total of 20 terminations.It contains 20 pins.A total of 20 pins are present on the ac-dc converter.Suitable mounting is provided by Surface Mount .The UCC2895 family can be used to search for similar acdc converters.In this AC to DC transformer, there are 4 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .It has been set to 10mA for the output current.This AC/DC converter produces a voltage of 250mV as its output.High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 16.5V .Using this ACDC converter, ALSO OPERATES IN CURRENT MODE is also accessible.
UCC2895Q Features
Packaged with 20-LCC (J-Lead)
With 20 pins
Output Current at 10mA
UCC2895Q Applications
There are a lot of Texas Instruments UCC2895Q AC DC Converters applications.
- Standby power supplies for TV
- Z-Wave
- Standby power
- Adaptors for DSCs
- Portable audio
- Shaver Charger
- AC/DC Adaptors/Chargers for PDAs
- Humidifier
- AC?DC USB chargers for Tablets
- Utility meters
