UCC2897PWG4
| Parameters | |
|---|---|
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2897 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~14.5V |
| Control Features | Enable, On Time Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 19ns |
| Supply Current-Max (Isup) | 3mA |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Nominal Input Voltage | 120V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 74 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
UCC2897PWG4 Overview
This switching controller fits most application requirements since it is packaged in a 20-TSSOP (0.173, 4.40mm Width) package. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 8.5V~14.5V voltage are supplied and operated. Suitable for a -40°C~105°C TA dc switcher. In this switching controller, the switch can be set to 250kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, On Time Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 20 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. UCC2897 can be searched for other relevant dc to dc converter ics. 20 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 900mV voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. It is set to 74 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is 1MHz frequency setting on the switching controller. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the need. To operate the voltage regulator dc to dc safely and reliably, users should apply 12V. A nominal working status is achieved when the input voltage is set to 120V. The supply voltage should be 12V. In order to ensure proper operation, the controller should not receive more current than 3mA.
UCC2897PWG4 Features
Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, On Time Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UCC2897PWG4 Applications
There are a lot of Texas Instruments UCC2897PWG4 DC to DC converter applications.
- Computer application technology
- Surge protection circuits
- Plate bending machines
- Balance equipment
- Printing equipment
- Bending machines
- Product testing
- Window air conditioners
- Mobile phones
- Scientific testing
