UCC2897PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2897 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~14.5V |
| Control Features | Enable, On Time Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 19ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Nominal Input Voltage | 120V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 74 % |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2897PWRG4 Overview
With its 20-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 8.5V~14.5V. Worked in an dc switcher with a -40°C~105°C TA rating. There is a switch at 250kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Enable, On Time Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 20 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 12V. In addition to "UCC2897", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 900mV voltage according to the test statistics. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. It is set to 74 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. A frequency of 1MHz is used by the switching controller. Hence, CAN ALSO BE CONFIGURED IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. Users should apply 12V to operate the voltage regulator dc to dc safely and reliably. 120V is the nominal working voltage. Switching controller is necessary to provide a voltage of 12V.
UCC2897PWRG4 Features
Transistor Driver Outputs
Switching Frequency: 250kHz
Enable, On Time Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UCC2897PWRG4 Applications
There are a lot of Texas Instruments UCC2897PWRG4 DC to DC converter applications.
- Production lines
- Hydraulic presses
- Various CNC machine tools
- Current source circuits
- Printing equipment
- Power supplies of electronic gadgets
- Analog precision reference circuits
- Plate bending machines
- Energy management systems
- Smoke exhaust equipment
