UCC28C40DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC28C40 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.6V~18V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28C40DG4 Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. A 6.6V~18V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~105°C TJ rating. The switching controller can be switched at Up to 1MHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Frequency Control for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UCC28C40" will reveal other relevant dc to dc converter ics. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 18V. You should note down the dc dc regulator's usual output current of 200mA when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement. It is possible to set the input voltage as 18V for nominal working statuses.
UCC28C40DG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C40DG4 Applications
There are a lot of Texas Instruments UCC28C40DG4 DC to DC converter applications.
- Magnetohydrodynamic power
- Flaw detection equipment
- Digital video recorders
- Driver circuits
- Gear/thread machining machines
- Domestic water pumps
- Window air conditioners
- Alternators
- Solar power plants
- Printing equipment
