UCC28C40DGK

8 Terminals 6.6V~18V 8-Pin UCC28C40 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28C40DGK
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 191
Description: 8 Terminals 6.6V~18V 8-Pin UCC28C40 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Weight	25.996513mg
Operating Temperature	-40°C~105°C TJ
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Frequency	1MHz
Base Part Number	UCC28C40
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	18V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.6V~18V
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	25ns
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Nominal Input Voltage	18V
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	100 %
Duty Cycle (Max)	96%
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC28C40DGK Overview

The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. 6.6V~18V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~105°C TJ rating. Using this switching controller, it is possible to switch at Up to 1MHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Searching "UCC28C40" will return other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 18V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 1MHz is used by the switching controller. DC to DC voltage regulator has the value of ALSO OPERATES IN CURRENT MODE to better satisfy the requirement. For nominal working status, the input voltage can be set as 18V.

UCC28C40DGK Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE