UCC28C41DR

8 Terminals 6.6V~18V 8-Pin UCC28C41 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28C41DR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 207
Description: 8 Terminals 6.6V~18V 8-Pin UCC28C41 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Max Duty Cycle	50 %
Duty Cycle (Max)	48%
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	-40°C~105°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	1MHz
Base Part Number	UCC28C41
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	18V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	6.6V~18V
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	25ns
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Nominal Input Voltage	18V
Switcher Configuration	BUCK-BOOST

UCC28C41DR Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 6.6V~18V voltage is supplied to the dc control and used for operating it. A -40°C~105°C TJ dc switcher is not a problem. The switching controller can be switched at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UCC28C41". 8 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 18V voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 1MHz. Hence, ALSO OPERATES IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. It is possible to set the input voltage to 18V for nominal working status.

UCC28C41DR Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE