UCC28C41QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | UCC28C41 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.6V~18V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28C41QDRQ1 Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. dc controls with 6.6V~18V voltage are supplied and operated. Worked in a -40°C~125°C TA dc switcher before. Switching can be done at Up to 1MHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. In addition to "UCC28C41", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, DC regulator outputs 18V volts. If you start a project, note down the dc dc regulator's usual output current of 200mA. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is suggested that users apply 15V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. The supply current of the voltage controller is 2.3mA.
UCC28C41QDRQ1 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
UCC28C41QDRQ1 Applications
There are a lot of Texas Instruments UCC28C41QDRQ1 DC to DC converter applications.
- Photovoltaic power
- Fire elevators
- Overvoltage protection circuits in TV sets
- Linear guide
- Communication system
- Textile machinery
- Sensitive electronic devices
- Milling machines
- Plate bending machines
- Various precision measuring instruments
