UCC28C43DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC28C43 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~18V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Min Input Voltage | 7.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 100 % |
| Isolation | Isolated |
| Duty Cycle (Max) | 96% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28C43DR Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 7.6V~18V. Worked in a -40°C~105°C TJ dc switcher before. A switching controller such as this can switch at a value of Up to 1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UCC28C43". There are a total of 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 18V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 1MHz is set for the switching controller. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE. 18V is the nominal working voltage. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. A voltage of 7.6V is required for the supply. The supply current of the voltage controller is 2.3mA.
UCC28C43DR Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C43DR Applications
There are a lot of Texas Instruments UCC28C43DR DC to DC converter applications.
- Computer rooms
- Gear/thread machining machines
- Fire elevators
- Automation technology
- Ball screw pair
- Constant current circuits
- seismic instrument power circuits
- Packaging
- Nuclear power plants
- Electric heating, lighting
