UCC28C43P

8 Terminals 7.6V~18V 8-Pin UCC28C43 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28C43P
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 289
Description: 8 Terminals 7.6V~18V 8-Pin UCC28C43 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~105°C TJ
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC28C43
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	18V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	2.3mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7.6V~18V
Quiescent Current	2.3mA
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	25ns
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Nominal Input Voltage	18V
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	100 %
Isolation	Isolated
Duty Cycle (Max)	96%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC28C43P Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7.6V~18V volts and has 7.6V~18V supply voltage. Workable in an dc switcher where -40°C~105°C TJ is the -40°C~105°C TJrm. Switching can be done at Up to 1MHz with this switching controller. Through Hole makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. UCC28C43 can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 18V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC switcher's Through Hole qualifies it for most applications and prototypes. Switching controllers work at 1MHz Hz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE so that the need can be met more directly. During dormancy, the dc switching uses 2.3mA. It is possible to set the input voltage to 18V for nominal working status. This the controllers dc has a nominal current supply of 2.3mA.

UCC28C43P Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE