UCC28C44P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC28C44 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 9V~18V |
| Quiescent Current | 2.3mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28C44P Overview
With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 9V~18V voltage are supplied and operated. Work well in dc switchers with a -40°C~105°C TJ. The switching controller is capable of switching at the Up to 1MHz position. The Through Hole makes it ideal for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. A search for "UCC28C44" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 18V voltage. You should note that the dc dc regulator's usual output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. Switching controllers operate at 1MHz frequencies. Hence, ALSO OPERATES IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. DC switching uses 2.3mA when it is dormant. 18V is the nominal working voltage.
UCC28C44P Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C44P Applications
There are a lot of Texas Instruments UCC28C44P DC to DC converter applications.
- Lathes
- Window air conditioners
- Computer application technology
- Driver circuits
- Direct power supply system
- Electric water heaters
- Wind power
- Production lines
- Series voltage regulation circuits
- Grinders
