UCC28C45DGKRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VSSOP |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 15V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 7.6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.3mA |
| Current - Output | 200mA |
| Voltage - Output | 18V |
| Topology | Flyback, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Isolation | Isolated |
| Duty Cycle (Max) | 50 % |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28C45DGKRG4 Overview
With a VSSOP package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape and Reel is the solid enclosure in which PMIC is packaged. There is a switch at 1MHz that can be used with this controller. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 8 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 1MHz is used by the switching controller. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement. Temperatures should be kept at -40°C or higher. At105°C, dc regulator should run. Switch converter has 1 total function(s). It is designed to have voltage regulators switchings with 8 pins. A nominal working status is achieved when the input voltage is set to 18V. With 200mA inputs, switching controller is ideal. During normaloperations, it outputs a value of 18V. Maximum supply voltage is 18V. This the controllers dc has a nominal current supply of 2.3mA.
UCC28C45DGKRG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C45DGKRG4 Applications
There are a lot of Texas Instruments UCC28C45DGKRG4 DC to DC converter applications.
- Power supplies of electronic gadgets
- Experimental setup
- Textile machinery
- Production lines
- Various CNC machine tools
- Handheld GPS
- Program control systems
- Low output voltage switching power supply circuits
- Ball screw pair
- Combined machine tools
