UCC28C45DR
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | UCC28C45 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.3mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~18V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Min Input Voltage | 8.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 50 % |
| Isolation | Isolated |
| Duty Cycle (Max) | 48% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
UCC28C45DR Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 7.6V~18V voltage are supplied and operated. Suitable for work in a -40°C~105°C TJ dc switcher. This switching controller can switch at Up to 1MHz. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. UCC28C45 can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 18V. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is 1MHz frequency setting on the switching controller. DC to DC voltage regulator has the value of ALSO OPERATES IN CURRENT MODE to better satisfy the requirement. A nominal working status is achieved when the input voltage is set to 18V. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. Voltage 8.2V is necessary for the supply. 2.3mA volts is the supply current.
UCC28C45DR Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C45DR Applications
There are a lot of Texas Instruments UCC28C45DR DC to DC converter applications.
- Wide-range voltage regulation circuits
- USB circuits
- Fire elevators
- Magnetohydrodynamic power
- PSRR circuits
- Special machining machine tools
- seismic instrument power circuits
- Various precision measuring detectors
- Radio equipment
- Sensitive electronic devices
