UCC28C45P

8 Terminals 7.6V~18V 8-Pin UCC28C45 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28C45P
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 294
Description: 8 Terminals 7.6V~18V 8-Pin UCC28C45 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Up to 1MHz Transistor Driver (Kg)

Details

Tags

Parameters
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~105°C TJ
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC28C45
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	18V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	2.3mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	7.6V~18V
Quiescent Current	2.3mA
Control Features	Frequency Control
Topology	Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	25ns
Synchronous Rectifier	No
Fall Time (Typ)	20 ns
Nominal Input Voltage	18V
Switcher Configuration	BUCK-BOOST
Max Duty Cycle	50 %
Isolation	Isolated
Duty Cycle (Max)	48%
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm

UCC28C45P Overview

With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). 7.6V~18V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~105°C TJ dc switcher before. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulator is made easier with Through Hole. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "UCC28C45". There are 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Statistically, the DC regulator outputs 18V voltage. You should note that the dc dc regulator's usual output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controllers work at 1MHz Hz. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN CURRENT MODE. As long as the dc switching is in a dormant state, it utilizes 2.3mA. For nominal working status, the input voltage can be set as 18V. For this the controllers dc, the nominal current supply is 2.3mA.

UCC28C45P Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE