UCC2912DPRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 156.489368mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, Thermal Limit |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Depth | 4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC2912 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Current - Output (Max) | 4A |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Min Input Voltage | 3V |
| Max Input Voltage | 8V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 8V |
| Internal Switch(s) | Yes |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | CT, /FAULT, IMAX, /SHTDWN |
| Length | 10mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2912DPRG4 Overview
There is a 16-SOIC (0.154, 3.90mm Width) package that includes this.At the moment, 1 channels are accessible.In the form of a Tape & Reel (TR), it is packaged.There are a total of 16 terminations on it.Device DUAL is in the terminal position.16 pins make up its total.High efficiency can be achieved by using 5V as supply voltage.In the way of Surface Mount, it's set up.An electrical component classified as Hot Swap Controller belongs to this category.The temperature should be set to -40°C~85°C to ensure reliable functioning.Hot-swappable device has General Purpose applications.Latched Fault, Thermal Limit features it.In the case of a 3V~8VV power source, it should work just fine.UCC2912 numbers belong to this family.A 16 pin is used for operation.This gadget is self-contained in?Power Management Circuits.The programmable features of this device are Current Limit, Fault Timeout.Presently, 1mA is in short supply.For normal operation, Vsup should be kept above 3V.Vsup is set to 8V, the maximum supply voltage.Hot-swappable device is important to note that the part has a power supply 5V.A maximum supply current of 2mA is required for the device to operate.Its maximum output is 4AV.
UCC2912DPRG4 Features
The terminal position of 16
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout
UCC2912DPRG4 Applications
There are a lot of Texas Instruments UCC2912DPRG4 hot swap controllers applications.
- Base station power distribution system
- Industrial computers and servers
- Supply voltage monitoring
- Inrush current control
- Industrial
- Loads
- Comprehensive analog and digital capabilities
- Networking
- Short circuit protection
- Redundant negative voltage supplies
