UCC2919DG4
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Depth | 4mm |
| Base Part Number | UCC2919 |
| Pin Count | 16 |
| Output Voltage | 14V |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Nominal Input Voltage | 8V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | CAP, CT, /FLT, IBIAS, IMAX, L/R, PL, /SD |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | UVLO |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
UCC2919DG4 Overview
You get it with the 16-SOIC (0.154, 3.90mm Width) package.Hot-swappable device is currently possible to access 1 channels.It's?packaged?in?the?form?of?a?Tube.Hot-swappable device has a total of 16 terminations.In this case, the device is located at terminal DUAL.There are a total of 16 pins on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.According to Surface Mount, it has been set up.In electrical components, Hot Swap Controller is the classification.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.Apps for General Purpose are available on the device.UVLO features it.Hot-swappable device should work if you use a 3V~8VV power source.Hot-swappable device is included in the UCC2919 family of numbers.This device operates by using 16 pins.The gadget in Power Management Circuits is self-contained.Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault features are programmable.Hot-swappable device is estimated that there is a current supply of 1mA.Surface Mount directs its position.Normally, Vsup should remain above 3V.Vsup is set to 8V, the maximum supply voltage.Hot-swappable device is important to note that the part has a power supply 5V.14V output voltage enables high efficiency.
UCC2919DG4 Features
The terminal position of 16
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 14V
UCC2919DG4 Applications
There are a lot of Texas Instruments UCC2919DG4 hot swap controllers applications.
- Limitting the inrush current
- Telecommunications
- Distributed power systems
- Current limit and current foldback limit functions
- Microcontrollers
- Base station
- Short circuit protection
- Continuous monitoring of device temperature
- Networking
- Overcurrent protection
