UCC2919DTR
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | UVLO |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Depth | 4mm |
| Base Part Number | UCC2919 |
| Pin Count | 16 |
| Output Voltage | 14V |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Nominal Input Voltage | 8V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | CAP, CT, /FLT, IBIAS, IMAX, L/R, PL, /SD |
| Length | 10mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2919DTR Overview
You can find it in the 16-SOIC (0.154, 3.90mm Width) package.Currently, 1 channels can be accessed.Hot-swappable device comes in the shape of a Tape & Reel (TR).Total terminations are 16.The terminal position of the device is DUAL.Hot-swappable device has a total of 16 pins on Hot-swappable device.High efficiency is possible at a voltage of 5V.Surface Mount sets it up.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.To ensure reliable operation, the temperature should be set to -40°C~85°C.Hot-swappable device has General Purpose applications.Hot-swappable device is featured in UVLO.Using a 3V~8VV power source should be able to power the device.UCC2919 is a family of numbers.16 pins are used to operate the system.As far as Power Management Circuits is concerned, this gadget is self-contained.Among its programmable features are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault.1mA is currently in short supply.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, Vsup should be maintained above 3V.The maximum supply voltage is set to 8V.Hot-swappable device is 5V type power supplies that are used in this part.Hot Swap operates at a maximum current of 1.5mA.There is no problem with a 14V output voltage if you want high efficiency.
UCC2919DTR Features
The terminal position of 16
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 14V
UCC2919DTR Applications
There are a lot of Texas Instruments UCC2919DTR hot swap controllers applications.
- Storage network
- Circuit power protectors
- Safe board insertion and extraction
- Automatic restart after load failure
- Current limit and current foldback limit functions
- Disconnect faulty loads before supply voltage drops
- Circuit breakers for high-side circuits
- Thermal limitation
- Load transient protection
- Power monitoring
