UCC2919PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | UVLO |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Depth | 4.5mm |
| Base Part Number | UCC2919 |
| Pin Count | 16 |
| Output Voltage | 14V |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Nominal Input Voltage | 8V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | CAP, CT, /FLT, IBIAS, IMAX, L/R, PL, /SD |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2919PWG4 Overview
As part of the 16-TSSOP (0.173, 4.40mm Width) package, it is included.At the moment, there are 1 channels available.In the form of a Tube, it is packaged.In total, it has 16 terminations.Device position DUAL is its terminal position.Total number of pins is 16.A supply voltage of 5V can result in high efficiency.The way it's set up is the way Surface Mount wants it.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.General Purpose applications are available on the device.As you can see in UVLO, it's featured.Hot-swappable device should work if you use a 3V~8VV power source.Hot-swappable device belongs to the UCC2919 family of numbers.Hot-swappable device is necessary to use 16 pins in order to operate the device.Despite its self-contained nature, Power Management Circuits is a very compact device.There are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault programmable features on this device.Currently, 1mA is in short supply.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.Hot-swappable device is important that the supply voltage (Vsup) is kept above 3V for normal operation of the device.Vsup is set to 8V, the maximum supply voltage.Hot-swappable device has a 5V power supply, which is the power supply used in the part.Hot Swap operates at a maximum current of 1.5mA.There is no problem with a 14V output voltage if you want high efficiency.
UCC2919PWG4 Features
The terminal position of 16
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 14V
UCC2919PWG4 Applications
There are a lot of Texas Instruments UCC2919PWG4 hot swap controllers applications.
- Power supply hotswap & inrush control
- Thermal limitation
- Continuous monitoring of device temperature
- Temperature monitor output
- Network router
- Overvoltage protection
- DC boost circuit
- High power circuit board
- Central office switching systems
- Disconnect faulty loads before supply voltage drops
