UCC29421PWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC29421 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 8V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 8V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 1.8V~8V |
| Control Features | Enable, Frequency Control, Low Battery, Reset |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.00065A |
| Frequency - Switching | 150kHz~1.2MHz |
| Input Voltage (Max) | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Duty Cycle (Max) | 88% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC29421PWTR Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 1.8V~8V. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 150kHz~1.2MHz with this switching controller. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Low Battery, Reset. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 3V nominal DC switcher's voltage input. In addition to "UCC29421", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 8V. The dc to dc regulator can only accept 8V input voltage. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 2MHz. In order to satisfy the need, DC to DC voltage regulator has a value of CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 8V. 0.00065A is the largest value switching converter outputs.
UCC29421PWTR Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1.2MHz
Enable, Frequency Control, Low Battery, Reset
PULSE WIDTH MODULATION
CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE
UCC29421PWTR Applications
There are a lot of Texas Instruments UCC29421PWTR DC to DC converter applications.
- Computer monitoring equipment of building
- Flaw detection equipment
- Injection molding machinery
- Wide-range voltage regulation circuits
- Window air conditioners
- Surface processing equipment
- SMT equipment
- Game consoles
- Solar power plants
- Various CNC machine tools
