UCC29422N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | CONFIGURABLE VOLTAGE MODE; PROGRAMMABLE PFM TECHNIQUE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 2.54mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC29422 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 1.8V~8V |
| Control Features | Enable, Frequency Control, Low Battery, Reset |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.00065A |
| Frequency - Switching | 150kHz~1.2MHz |
| Input Voltage (Max) | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 88% |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UCC29422N Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 1.8V~8V. A -40°C~85°C TA dc switcher is not a problem. There is a switch at 150kHz~1.2MHz that can be used with this controller. Through Hole makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Low Battery, Reset. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 20 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 3V. You can find other relevant dc to dc converter ics by searching "UCC29422". There are only 20 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. A 8V voltage of DC regulator was detected in the test statistics. A maximum voltage of 8V is accepted by the dc to dc regulator as an input voltage. 2MHz is the frequency of the switching controller. This value is CONFIGURABLE VOLTAGE MODE; PROGRAMMABLE PFM TECHNIQUE so that DC to DC voltage regulator better serves the purpose. Switching converter outputs current to the greatest value of 0.00065A.
UCC29422N Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1.2MHz
Enable, Frequency Control, Low Battery, Reset
PULSE WIDTH MODULATION
Frequency: 2MHz
CONFIGURABLE VOLTAGE MODE; PROGRAMMABLE PFM TECHNIQUE
UCC29422N Applications
There are a lot of Texas Instruments UCC29422N DC to DC converter applications.
- Adjustable voltage or current linear circuits
- Driver circuits
- Sink circuits
- Printing equipment
- Ball screw pair
- Boring machines
- Program control systems
- Terrestrial set-top boxes
- Shearing machines
- Industrial controllers
