banner_page

UCC2946D

8 Terminals 8-Pin UCC2946 Voltage supervisor1 Channels Min 2.1V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC2946D
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 843
  • Description: 8 Terminals 8-Pin UCC2946 Voltage supervisor1 Channels Min 2.1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number UCC2946
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 2.5/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 2.1V
Operating Supply Current 10μA
Nominal Supply Current 18μA
Max Supply Current 18μA
Adjustable Threshold YES
Quiescent Current 10μA
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 1.17V
Max Reset Threshold Voltage 1.26V
Threshold Voltage 1.235
Overvoltage Threshold 1.26V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC2946D Overview


Power management is mounted through 8 terminals. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use UCC2946, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 2.5/5V volts of power. At the most, voltage supervisor can work with a supply temperature of 18μA.

UCC2946D Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2.1V
10μA operating supply current

UCC2946D Applications


There are a lot of Texas Instruments UCC2946D Voltage Supervisors applications.

  • Automotive permanent magnet synchronous motors
  • Stable power system
  • FPGA design
  • Low voltage/high power - AI, GPU
  • Battery-powered equipment
  • Important electronics for automotive safety
  • DVR
  • Power distribution systems of infant care room
  • Power communication system
  • Military electronics

Write a review

Note: HTML is not translated!
    Bad           Good