UCC2946PW
| Parameters | |
|---|---|
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC2946 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 18μA |
| Max Supply Current | 18μA |
| Adjustable Threshold | YES |
| Quiescent Current | 10μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 1.17V |
| Max Reset Threshold Voltage | 1.26V |
| Threshold Voltage | 1.235 |
| Overvoltage Threshold | 1.26V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
UCC2946PW Overview
There are 8 terminals connected to this power management, which makes it easy to mount. A Tray package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-TSSOP (0.173, 4.40mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 10μA is the recommended value. You can always use UCC2946, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 2.5/5V volts of power. A maximum supply temperature of 18μA can be used with this power management.
UCC2946PW Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.1V
10μA operating supply current
UCC2946PW Applications
There are a lot of Texas Instruments UCC2946PW Voltage Supervisors applications.
- Electronics installed in the vehicle
- FPGA design
- WiFi router
- Stable power system
- Household appliances
- External alarm
- Satellite navigation
- Leakage protection
- Medical-specific insulation monitor
- Power communication system
