UCC2946PWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC2946 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 18μA |
| Max Supply Current | 18μA |
| Adjustable Threshold | YES |
| Quiescent Current | 10μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 1.17V |
| Max Reset Threshold Voltage | 1.26V |
| Threshold Voltage | 1.235 |
| Overvoltage Threshold | 1.26V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2946PWTR Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 8-TSSOP (0.173, 4.40mm Width) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins are on the supervisor. IC management can only work with a supply voltage of 2.1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 10μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to UCC2946, which is the base power ics number. This power management requires 2.5/5V power to work. The maximum supply temperature is 18μA.
UCC2946PWTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.1V
10μA operating supply current
UCC2946PWTR Applications
There are a lot of Texas Instruments UCC2946PWTR Voltage Supervisors applications.
- Electronics installed in the vehicle
- Microcontroller system
- Sensitive sensors
- WiFi router
- Digitally controlled LDO regulators circuit
- Urban rail transit weak current power monitoring
- Consumer electronics
- Detection of phase loss
- Set top box
- Power distribution systems of operating room
