UCC2960DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 400kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 100mA |
| Frequency (Max) | 400kHz |
| Voltage - Output | 700mV |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 19V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 72 % |
| Duty Cycle (Max) | 75 % |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2960DG4 Overview
It is embedded in package SOIC .A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.There is 400kHz switching frequency.A total of 8 terminations have been recorded.On the ac/dc converter, there are 8 pins.The pins of the ac-dc converter total to 8 .In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter reaches high efficiency when operated at a frequency of 400kHz .When 85°C is set to the maximum, the AC to DC power converter will run continuously.Minimum working temperature of this isolated switch must not be lower than -40°C .It provides maximum design flexibility due to a 100mA output current.There is 700mV output voltage from it.This Memory AC to DC converter has a maximum frequency of 400kHz MHz.
UCC2960DG4 Features
Packaged with SOIC
Switching Frequency at 400kHz
With 8 pins
UCC2960DG4 Applications
There are a lot of Texas Instruments UCC2960DG4 AC DC Converters applications.
- LED lights
- Battery chargers for mobile devices with touchpad display
- Low power ac?dc Adapters for Chargers
- Consumer electronics
- Z-Wave
- Battery chargers for media tablets
- Charger
- RCC SMPS
- Switching AC-DC Adapter
- USB type-c v1.2 chargers with optional VDM
