UCC2960P
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 400kHz |
| Base Part Number | UCC2960 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~19V |
| Control Features | Frequency Control, Soft Start |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 19V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2960P Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.At this point, the switching frequency reaches Up to 400kHz .The voltage range of the supply can be set to 8V~19V (Vcc/Vdd).As a result, it has a total of 8 terminations.In this ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.Suitable mounting is provided by Through Hole .Similar acdc converters can be found using the UCC2960 family.In this AC to DC transformer, there are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .We are setting the output current to 100mA .The voltage output by this AC/DC converter is 700mV .A high efficiency is achieved when operating at a frequency of 400kHz .
UCC2960P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 400kHz
With 8 pins
Output Current at 100mA
UCC2960P Applications
There are a lot of Texas Instruments UCC2960P AC DC Converters applications.
- Adapters for Handheld Electronics
- Air conditioners
- ATX/BTX Auxiliary Power
- Home Appliance Applications
- Standby Power Supply
- Power adapters for network devices
- Adaptors for DSCs
- Chargers for cell/cordless phones
- Battery chargers for cellular phones
- Adapter/Charger for Cell
