UCC2960PG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 400kHz |
| Base Part Number | UCC2960 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~19V |
| Control Features | Frequency Control, Soft Start |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 19V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2960PG4 Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.The switching frequency reaches Up to 400kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8V~19V , the AC/DC converter may be used.A total of 8 terminations have been recorded.There are 8 pins on this ac/dc converter.Up to 8 pins are present on the ac-dc converter.It is suitable for mounting by Through Hole .Similar acdc converters can be found using the UCC2960 family.AC to DC converter is necessary to run 1 outputs.Switching Regulator or Controllers contains the ac to dc conversions.AC to DC converter is set to 100mA for the output current.As a result, its output voltage is 700mV .High efficiency can be achieved when AC to DC converters frequency is set to 400kHz .
UCC2960PG4 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 400kHz
With 8 pins
Output Current at 100mA
UCC2960PG4 Applications
There are a lot of Texas Instruments UCC2960PG4 AC DC Converters applications.
- WiFi Wireless
- SMPS house keeping power supplies
- Power Adaptors
- Adaptors for DSCs
- Consumer electronics
- Lighting controls
- LED Driver
- Smartphones
- Portable Apparatus
- Air conditioners
