banner_page

UCC2972NG4

2.54mm PMIC UCC2972 8 Pin 80kHz~160kHz 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC2972NG4
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 581
  • Description: 2.54mm PMIC UCC2972 8 Pin 80kHz~160kHz 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Weight 523.190449mg
Operating Temperature -40°C~85°C
Packaging Tube
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type CCFL Controller
Subcategory Switching Regulator or Controllers
Technology BICMOS
Voltage - Supply 4.5V~20V
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 80kHz~160kHz
Base Part Number UCC2972
Pin Count 8
Input Voltage-Nom 12V
Operating Supply Current 7mA
Nominal Supply Current 7mA
Output Current 100mA
Input Voltage (Min) 4.5V
Control Mode CURRENT-MODE
Input Voltage (Max) 25V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration CURRENT FED PUSH-PULL
Dimming No
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC2972NG4 Overview


Based on Tube's materials, packaged.It's no secret that electronic manufacturers are attracted to the 8-DIP (0.300, 7.62mm)'s low package cost.A Through Hole mount is used on the PCB to mount it.Type CCFL Controller applies to standard grade applications.Power supply voltage ensures its normal operation.In all cases, -40°C~85°C should be operated.It can still perform accurately at 80kHz~160kHz frequency.Among its best features is a number of UCC2972.There are 8 terminations on it.During operation, the device is in 1 mode.There is a set current of 7mA for the device's supply.Component 8 stays at its pin number.It has 8 pins total in its sum.Subcategory Switching Regulator or Controllers can be assigned to the item.In this instance, the output current is set to 100mA.The input voltage must at least be 4.5V for it to function.It is possible to input voltages up to 25V.

UCC2972NG4 Features


Mounting type of Through Hole
Switching Regulator or Controllers subcategory

UCC2972NG4 Applications


There are a lot of Texas Instruments UCC2972NG4 Lighting Controllers applications.

  • To reduce power noise & signal noise
  • Audio crossover
  • DC buffering
  • To enhance power efficiency
  • Flashtube ignition
  • Spot welding
  • Voltage doubling
  • DC link
  • Smoothing
  • Lighting ballast

Write a review

Note: HTML is not translated!
    Bad           Good