UCC35701D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 11V |
| Frequency | 700kHz |
| Base Part Number | UCC35701 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Voltage |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 9V~15V |
| Control Features | Soft Start, Sync |
| Topology | Boost, Buck, Flyback, Forward |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 20mA |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 11V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Input Current | 750μA |
| Duty Cycle | 99% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35701D Overview
It is embedded in package 14-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tube .A AC/DC converter of this type is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -55°C~150°C TJ °C in order to perform.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The voltage range of the supply can be set to 9V~15V (Vcc/Vdd).As a result, it has had 14 terminations.There are 14 pins on the ac/dc converter.The ac-dc converter has 14 pins.The ac dc converters are suitable to mount by Surface Mount .Based on the UCC35701 family, you can search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 100mA .This AC/DC converter produces a voltage of 1V as its output.A high efficiency can be achieved by operating at a frequency of 700kHz .In the following link, you will find the REACH SVHC standard: No SVHC .Keep in mind that this AC to DC converter should always be set to 11V .It is configured to output Voltage .
UCC35701D Features
Packaged with 14-SOIC (0.154, 3.90mm Width)
With 14 pins
Output Current at 100mA
Output Type : Voltage
UCC35701D Applications
There are a lot of Texas Instruments UCC35701D AC DC Converters applications.
- Battery chargers for cordless
- Set Top Boxes (STB)
- Networking
- AC/DC Adaptors/Chargers for Cell Phones
- DVD players
- Wall switches
- AC/DC Adaptors/Chargers for E-books
- Standby Power for General Off-Line Applications
- Set-top boxes
- Home Appliance Applications
