UCC35701N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 700kHz |
| Base Part Number | UCC35701 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Voltage |
| Max Output Current | 1.2A |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 9V~15V |
| Quiescent Current | 750μA |
| Control Features | Soft Start, Sync |
| Topology | Boost, Buck, Flyback, Forward |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 20mA |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 11V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Input Current | 750μA |
| Duty Cycle | 99% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35701N Overview
14-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.The AC/DC power converter type is Tube .Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 9V~15V .There are a total of 14 terminations.A ac/dc converter with 14 pins is available.The pins of the ac-dc converter total to 14 .There are no problem mounting the ac dc converters by Through Hole .The UCC35701 family can be used to search for similar acdc converters.A total of 1 outputs are to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 100mA for the output current.The voltage output by this AC/DC converter is 400mV .As long as AC to DC converter is operated at frequency 700kHz ,it is capable of attaining high efficiency.REACH SVHC standard can be found at No SVHC .It is important to keep this AC to DC converter set to 11V .When set to 750μA , AC to DC converter consumes quiescent current.Voltage is the output it is configured with.
UCC35701N Features
Packaged with 14-DIP (0.300, 7.62mm)
With 14 pins
Output Current at 100mA
Output Type : Voltage
UCC35701N Applications
There are a lot of Texas Instruments UCC35701N AC DC Converters applications.
- Battery Chargers
- Standby power
- Small off-line low voltage power supplies
- Vacuum Cleaner
- Standby power supplies for TV
- Low-Voltage I/O System Power
- Automotive Infotainment
- Adapter for ADSL
- Linear Adapter Replacements
- Automotive Telematics
