UCC35702N
| Parameters | |
|---|---|
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.620005g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 700kHz |
| Base Part Number | UCC35702 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 8.8V~15V |
| Quiescent Current | 750μA |
| Control Features | Current Limit, Frequency Control, Sequencing, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Clock Sync | Yes |
| Height | 5.08mm |
UCC35702N Overview
The switching controller fits in the 14-DIP (0.300, 7.62mm) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 8.8V~15V. A 0°C~70°C TA dc switcher is not a problem. The switching controller is capable of switching at the 100kHz position. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Frequency Control, Sequencing, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. 14 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 11V. You can find other relevant dc to dc converter ics by searching "UCC35702". 14 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 9.6V. Test statistics indicate DC regulator outputs 400mV voltage. The dc dc regulator's usual output current is 1.2A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. There is 700kHz frequency setting on the switching controller. DC switching uses 750μA when it is dormant.
UCC35702N Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz
UCC35702N Applications
There are a lot of Texas Instruments UCC35702N DC to DC converter applications.
- Energy management systems
- Product burn-in
- Boring machines
- Smoke prevention equipment
- Grinders
- Computer application technology
- Constant current circuits
- PSRR circuits
- Communication system
- Emergency lighting monitoring equipment
