UCC35702PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 700kHz |
| Base Part Number | UCC35702 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.8V~15V |
| Quiescent Current | 750μA |
| Control Features | Current Limit, Frequency Control, Sequencing, Soft Start |
| Input Voltage (Min) | 9.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 20mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 99 % |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35702PW Overview
This switching controller fits most application requirements since it is packaged in a 14-TSSOP (0.173, 4.40mm Width) package. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. 8.8V~15V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a 0°C~70°C TA. This switching controller can switch at 100kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control, Sequencing, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 14 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 11V. UCC35702 can be searched for other relevant dc to dc converter ics. In total, switching converter has 14 pins. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 9.6V. Statistically, DC regulator outputs 400mV volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. The duty cycle of the voltage regulator dc to dc can be set to 99 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 700kHz Hz. During dormancy, the dc switching uses 750μA. There must be a voltage supply of 11V volts. There should be 20mA current exceeding 20mA supplied to the controller.
UCC35702PW Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
Frequency: 700kHz
UCC35702PW Applications
There are a lot of Texas Instruments UCC35702PW DC to DC converter applications.
- Electrical power transmission
- Sink circuits
- Energy management systems
- Automatic testing equipment
- Planers
- Smoke prevention equipment
- Plate bending machines
- Television equipment
- Product testing
- USB circuits
