UCC35705DGKG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Base Part Number | UCC35705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 93 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35705DGKG4 Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). 8.2V~15V is the supply voltage and the operating voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. This switching controller can switch at 1MHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Current Limit for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 8 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 11V nominal DC switcher's voltage input. A search for "UCC35705" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. As determined by the test statistics, the output voltage of DC regulator is 300mV. It's important to remember that the dc dc regulator's normaloutput current is 5mA, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 93 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 4MHz Hz. For nominal working status, the input voltage can be set as 30V. There is a requirement for a 11V supply voltage.
UCC35705DGKG4 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC35705DGKG4 Applications
There are a lot of Texas Instruments UCC35705DGKG4 DC to DC converter applications.
- Remotely powered electric motors
- Pipe bending machines
- Magnetohydrodynamic power
- Serial communication converter
- Digital precision reference circuits
- Sensitive electronic devices
- Radio equipment
- Motor controller circuits
- Electrical power transmission
- Low output voltage switching power supply circuits
