UCC35705DTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 11V |
| Frequency | 4MHz |
| Base Part Number | UCC35705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 93 % |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35705DTR Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.2V~15V. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller can be switched at 1MHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 11V. You can find other relevant dc to dc converter ics by searching "UCC35705". Switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 300mV voltage. The dc dc regulator's usual output current is 5mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 93 % to ensure reliability during power-up and power-down. 4MHz is the frequency of the switching controller. A nominal working status is achieved when the input voltage is set to 30V. There is a requirement for a 11V supply voltage.
UCC35705DTR Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC35705DTR Applications
There are a lot of Texas Instruments UCC35705DTR DC to DC converter applications.
- Imported equipment
- Ball screw pair
- Wide-range voltage regulation circuits
- Scientific testing
- Smoke exhaust equipment
- Direct power supply system
- Various precision measuring detectors
- Network technology
- Pipe bending machines
- Geothermal power
