UCC35705P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | UCC35705 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 300mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 30V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 93 % |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC35705P Overview
It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 8.2V~15V. Worked in a 0°C~70°C TA dc switcher before. With this switching controller, you can switch at 1MHz. dc dc regulator can be generalized using Through Hole. In order to control switching efficiently, the dcdc regulator features Current Limit. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 11V. Other relevant dc to dc converter ics can be found by searching "UCC35705". Total pins of switching converter are 8. Particularly, switching converter is a type of Switching Regulator or Controllers. A 300mV voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 5mA, which you should keep in mind when starting a project. It is set to 93 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. 4MHz is the frequency of the switching controller. You can set the input voltage to 30V for nominal working status. The supply voltage must be 11V.
UCC35705P Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz
UCC35705P Applications
There are a lot of Texas Instruments UCC35705P DC to DC converter applications.
- Thermal power
- Medical equipment
- Flaw detection equipment
- Handheld GPS
- Machining centers
- Combined machine tools
- SMT equipment
- Digital display device
- Digital precision reference circuits
- Packaging
