UCC3570NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 450kHz |
| Base Part Number | UCC3570 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 11V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 9V~15V |
| Control Features | Frequency Control, Soft Start |
| Topology | Forward |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 13V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3570NG4 Overview
There is a ac to dc converter embedded in package 14-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~70°C TA degrees Celsius.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As soon as the switching frequency reaches 500kHz , the circuit is closed.Vcc/Vdd can be used within the range of 9V~15V supply voltage.There are a total of 14 terminations.The ac/dc converter has 14 pins.The ac-dc converter has 14 pins.The ac dc converters are suitable for mounting by Through Hole .Based on the UCC3570 family, you can search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 100mA .In this AC to DC transformer, the output voltage is 400mV .A high efficiency can be achieved by operating at a frequency of 450kHz .Using this ACDC converter, ALSO OPERATES IN CURRENT MODE is also accessible.It is possible for the interface IC to conduct when the supply voltage is 15V .
UCC3570NG4 Features
Packaged with 14-DIP (0.300, 7.62mm)
Switching Frequency at 500kHz
With 14 pins
Output Current at 100mA
Operating Supply Voltage at the range of 15V
UCC3570NG4 Applications
There are a lot of Texas Instruments UCC3570NG4 AC DC Converters applications.
- DVD players
- Low-Voltage I/O System Power
- AC/DC Adaptors/Chargers for PDAs
- Power tools
- MP3
- Smartphones
- Digital cameras
- Set-top boxes
- Universal input AC/DC adapters (15W - 45W)
- Adapter for ADSL
