UCC3580DTR-4
| Parameters | |
|---|---|
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Supply Current-Max (Isup) | 3.5mA |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC3580 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
UCC3580DTR-4 Overview
In the package 16-SOIC (0.154, 3.90mm Width) , the ac to dc converter is embedded.The ac dc converter is available in Tape & Reel (TR) case.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Vcc/Vdd can be used within the range of 8.5V~15V supply voltage.A total of 16 terminations have been recorded.The ac/dc converter has a total of 16 pins.The ac dc converters are suitable to mount by Surface Mount .If you select the UCC3580 family, you will be able to search for similar acdc converters.Running 2 outputs is available.The following ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 100mA .There is 400mV voltage output from it.High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 14V .It is imperative that this AC to DC converter is set to 12V at all times.
UCC3580DTR-4 Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 100mA
UCC3580DTR-4 Applications
There are a lot of Texas Instruments UCC3580DTR-4 AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- Standby and Auxiliary Power Supplies
- MP3
- Consumer electronics
- Replacements for bulky plug-in transformers
- Standby power supplies for IR
- AC?DC USB chargers for Cameras
- Appliance Power Supplies
- Humidifier
- Power adapters for network devices
