UCC3580N-1G4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Frequency | 1MHz |
| Base Part Number | UCC3580 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 69 % |
| Duty Cycle (Max) | 66% |
| Output Phases | 1 |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3580N-1G4 Overview
With a 16-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. There is a Tube solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8.5V~16V. Qualified to work in an dc switcher with 0°C~70°C TA. In this switching controller, the switch can be set to 400kHz. The Through Hole allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. 16 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics can be found by searching "UCC3580". There are only 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 400mV voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 69 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Through Hole. A frequency of 1MHz is used by the switching controller.
UCC3580N-1G4 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC3580N-1G4 Applications
There are a lot of Texas Instruments UCC3580N-1G4 DC to DC converter applications.
- Automatic plug-in machines
- CMM
- Industrial robots
- Communication system
- Product testing
- Ball screw pair
- Balance equipment
- SMT equipment
- Television equipment
- Driver circuits
