UCC3580N-4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC3580 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~15V |
| Control Features | Soft Start |
| Input Voltage (Min) | 10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 14V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Max Duty Cycle | 69 % |
| Switching Frequency | 430kHz |
| Duty Cycle | 66% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3580N-4 Overview
There is a ac to dc converter embedded in package 16-DIP (0.300, 7.62mm) .In Tube case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Vcc/Vdd can be used within the range of 8.5V~15V supply voltage.As a result, it has a total of 16 terminations.In this ac/dc converter, there are 16 pins.There are a total of 16 pins on the ac-dc converter.It is suitable for mounting by Through Hole .It is possible to search for similar acdc converters by using the UCC3580 family.There are 2 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 100mA .Its output voltage amounts to 400mV .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 14V .
UCC3580N-4 Features
Packaged with 16-DIP (0.300, 7.62mm)
With 16 pins
Output Current at 100mA
UCC3580N-4 Applications
There are a lot of Texas Instruments UCC3580N-4 AC DC Converters applications.
- AC-DC Output Power Conversion Applications
- RCC SMPS
- AC?DC USB chargers for Cell Phones
- Standby Power Supplies
- Home Appliance Applications
- Low power ac?dc Adapters for Chargers
- Off--line Battery Charger
- Small off-line low voltage power supplies
- Tablets
- Replaces linear transformers
