UCC3585D
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | UCC3585 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 6.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 485kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3585D Overview
The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 3V~5.5V. Worked in a 0°C~85°C TA dc switcher before. Switching can be done at 500kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 3.3V. Searching "UCC3585" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. 3V should be the minimum input voltage for the dc dc voltage regulator. A 900mV voltage of DC regulator was detected in the test statistics. It should be fully noted that the dc to dc regulator only accepts 6.3V input voltage at most. In most cases, the dc dc regulator's output current is 500mA. This information should be noted when you begin working with the component. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 485kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 5V.
UCC3585D Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
UCC3585D Applications
There are a lot of Texas Instruments UCC3585D DC to DC converter applications.
- Printing
- Smoke prevention equipment
- SMT equipment
- Ball screw pair
- Product testing
- Drilling machines
- Serial communication converter
- Various precision measuring instruments
- Linear guide
- Program control systems
