UCC3585MTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | UCC3585 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 6.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 485kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3585MTRG4 Overview
This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 3V~5.5V. Suitable for work in a 0°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 500kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 3.3V. Searching "UCC3585" will return other relevant dc to dc converter ics. 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 3V. According to the test statistics, DC regulator outputs 900mV voltage. Considering the dc to dc regulator can only accept 6.3V input voltage, it is important to take note of this. The Surface Mount makes DC switcher suitable for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 485kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5V. The output value is set to the greatest value of 1A.
UCC3585MTRG4 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
UCC3585MTRG4 Applications
There are a lot of Texas Instruments UCC3585MTRG4 DC to DC converter applications.
- Wide-range voltage regulation circuits
- Handheld GPS
- Computer rooms
- Computed tomography (CT)
- Energy management systems
- Laboratories
- Medical equipment
- Telecommunications equipment
- Nuclear power plants
- Current source circuits
