UCC37321DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC37321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 3W |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37321DGN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.There is a package in the form of Tube.Gate drivers is mounted in the way of Surface Mount.A supply voltage of 4V~15V demonstrates its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~70°C TA.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Under its base part number UCC37321, various related parts can be found.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.A supply voltage of 14V is required for operation.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 9A.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.The basis of this model has 1 outputs integrated.An output current of 9A is supported.This device has a maximum power dissipation of 3W, indicating that it is capable of reducing power loss without overheating.The supply current should be kept at 650μA to ensure higher stability.
UCC37321DGN Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC37321DGN Applications
There are a lot of Texas Instruments UCC37321DGN gate drivers applications.
- Motor Control
- High-speed communications
- High frequency line drivers
- Topologies
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
- Portable Media Players
- LCD/LCoS/DLP portable and embedded pico projectors
- Dual-Battery Systems
- Industrial Motor Inverter - Power Tools, Robotics
