UCC37321DGNR
| Parameters | |
|---|---|
| Turn Off Time | 0.07 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC37321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 3W |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
UCC37321DGNR Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.There is a package in the form of Tape & Reel (TR).Surface Mount is the way in which it is mounted.Using a 4V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.Temperature range 0°C~70°C TA is allowed for this device.Mosfet driver uses Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.The base part number UCC37321 refers to a number of related parts.The device is mounted with Surface Mount.The pins are configured with 8 when designing the chip.This device operates with 14V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 9A volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has 8 component pins.The basis of this system consists of 1 outputs.The device is capable of delivering a current of 9A.Using 3W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 650μA in order to achieve greater stabilMosfet gate driversy.
UCC37321DGNR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 3W
UCC37321DGNR Applications
There are a lot of Texas Instruments UCC37321DGNR gate drivers applications.
- High-voltage isolated DC-DC converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High current laser/LED systems
- Isolated Supplies for controller area network (CAN),
- DC/DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- Isolated Supplies for Motor Control
- RGB applications
- Portable computers
