UCC37321DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | UCC37321 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 650mW |
| Output Current | 9A |
| Max Supply Current | 650μA |
| Propagation Delay | 70 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.1V 2.7V |
| Turn Off Time | 0.07 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC37321DR Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~15V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~70°C TA.This program uses the input type of Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number UCC37321.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 14V has to be applied.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.An output current as high as 9A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.There are 8 component pins on the board.There are 1 outputs integrated for its basis.The output current supported by the device is 9A.Its maximum power dissipation of 650mW also demonstrates its maximum ability to transfer power without overheating.If you want a stable supply current, you should keep it at 650μA.
UCC37321DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC37321DR Applications
There are a lot of Texas Instruments UCC37321DR gate drivers applications.
- Portable Media Players
- Solar inverters
- White Goods - Air Conditioner, Washing Machine,
- Motor Drives
- Line drivers
- Commercial air-conditioning (CAC)
- AC-DC Inverters
- Video amplifiers
- Welding
- Dual-Battery Systems
