UCC37321PE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 350mW |
| Nominal Supply Current | 650μA |
| Power Dissipation | 350mW |
| Max Supply Current | 650μA |
| Current - Output | 9A |
| Propagation Delay | 70 ns |
| Turn On Delay Time | 70 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 30 ns |
| Output Polarity | TRUE AND INVERTED |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 9A |
| High Side Driver | NO |
| Turn Off Time | 0.07 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC37321PE4 Overview
There is greater flexibility with the PDIP package.Mosfet driver is based on 8 terminations.The device is mounted with Through Hole.In the device, there are 8 pins.Mosfet driver is designed specifically to run on 14V volts of power.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 9A that can be achieved.There are several useful electronic components in this subcategory of MOSFET Drivers.The number of component pins is 8.For its basis, there are 1 outputs integrated.There is a maximum operating temperature of 70°C.Operating temperatures can be as low as 0°C.As a precaution, make sure the supply current is kept at 650μA.In order for the device to operate, the supply voltage must be 15V.A supply voltage of 4V is the minimum value required to operate the device.A current of 9A is output by the device.
UCC37321PE4 Features
8 pins
UCC37321PE4 Applications
There are a lot of Texas Instruments UCC37321PE4 gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- Topologies
- Solar power supplies
- Active filtering
- 3-Phase Motor Inverter Driver
